 | Micro-Link Switch Panel
- UK Legal - Type Approved. 'e11' Marked by Woodway.
- Provides a flexible and intuitive control interface between the driver and the vehicle's emergency response equipment.
- 6 standard sized and 1 extra large customer programmable switch 999/ARRIVAL/RESET
- Auto-Dim automatically reduces the intensity of the 'switch active' illumination to prevent driver distraction at night.
- Permanent back light illumination for low light viewing of legends and switches at night.
- Extra large customer programmable switch toggles through a pre-configured group of functions - typically '999'/'Arrival' & RESET
- 'Switch Active' repeater provides an audible beep and flashes an LED lamp every 30 seconds to alert the driver that a switch is 'active'
- 'Walk Test' sequentially makes each of the standard 6 switches 'active' for 4 seconds to confirm that the switch panel and equipment it is controlling is serviceable.
- Data transmission between the keypad interface module and the receiver/output module is via a single copper wire link.
- Output Receiver module contains 7 relay outputs, 1 per switch plus auxilliary timed output.
- Automatic 'Sleep Mode' - If the switch panel is inactive & the vehicle ignition is switched 'off' the switch panel automatically reverts to a low power mode to reduce vehicle battery drain.
- Timed auxiliary output. When 'sleep mode' is active a output may be wired to a customer supplied relay to switch vehicle systems off such as comm.'s equipment etc.
- Individual switches. Customers may re arrange the switch layout.
- Individual switch legends are replaceable.
- Switches may now be programmed for either latching or momentary action
- Low battery voltage warning.
- NPIA AES Specification 5 issue 9 approved.
Switch panel legend set is made to customer specification. Our sales department will contact you to confirm your requirements.
Click here to download the MICRO-LINK information sheet in pdf format
|
